เครื่องเช็คและค้นหาปลายสาย LAN สายโทรศัพท์ สายโคเอเชียล

Features:

• Measure length of network cable, coaxial cable, telephone cable and USB cable with three method (M-S, M-R and OPEN), capable to measure the cable at length of 1500m, and precision of measuring cable length and position of broken line is up to 98% 
• Test open circuit, short circuit, cross connection, reverse connection, pairing connection and broken wire positioning for telephone cable, BNC cable and USB cable with M-S and M-R method visually display on LCD 
• Perform crosstalk test on network cable for solving the potential problem of slow speed 
• Quickly find the target wire or cable among the plenty of network cables, telephone cables, coaxial lines and other various kinds of wires 
• Make accurate determination of open circuit position (left, right or middle)     Perform cable tracking on exchanger or Router with power-on 
• Low voltage prompt function is available in case of over low voltage on the main unit 
• Featuring simple control, large screen display and open-and -shut test result 
• Automatic delay power on-off and backlight function 
• With Lighting lamp enables to use in a dark environment 
• Remote identifier is not necessary to perform length measurement and pairing test 
• Self-checking function and automatically compensate any change in battery capacity or ambient temperature 
• Single chip computer software watchdog design and reliable operation

Specifications:

• Display: Dot matrix 128 x 64 (effective visible area is 56 x 40mm) 
• Testing and Detecting Cable types:
  • STP/UTP 
  • 5E 
  • 6E 
  • Network cable 
  • Telephone cable 
  • Coaxial cable 
  • USB signal cable 
  • Common metal wires connected with alligator clip 
• Testing device interface:
  • Main unit: 
  • RJ45 (M)
    • RJ45 (S) 
    • Loop interface 
    • BNC connector 
    • USB B-type female interface 
  • Remote identifier:
    • RJ45 
    • RJ11 
    • BNC connector 
    • USB A-type female interface 
• Lenght measurement
  • Range: 1~1200m 
  • Calibration precision: 2% (±0.5m, or ±1.5 feet); (calibration; cable>10m)measurement precision: 3%((±0.5m or ±1.5ft); (AMP, CAT5E, 6E cable material) 
  • Display unit: meter, inch, yard 
• Lenght calibration: User may use a cable at a known length to set a calibration coefficient. Calibration length is over 10m 
• Line sequence and cable failure positioning: used for Line Finding two-core cable or cable with over two cores 
• Line finding function: used for Lind Finding two-core cable or cable with over two cores 
• Operating Environment
  • Temperature: -10° ~ 60°C 
  • Humidity: 20% ~ 70% 
• Power Supply:
  • Master: 9V compound tandem cell 
  • Reciever: 9V compound tandem cell 
• Overall dimensions
  • Main tester: 185 x 80 x 32mm 
  • Reciever: 218 x 46 x 29mm 
  • Remote indentifier: 107 x 30 x 24mm