TE1018 Static Check Meter เครื่องวัดปริมาณไฟฟ้าสถิตในตัวบุคล

INTRODUCTION
The TE1018 Static-Check Meter is a simple, easy-to-use and inexpensive unit indicates how much static is present on a person and that drains the charge to the connected ground. This unit can be held in the held or mounted to a wall. The TE1018 Static-Check Meter is the all-around audit tool for your protection against static.

 FEATURES:

• Quick visual display of static 0-19,990 volts
• Touch to test static in both positive and negative polarity
• Easy to ground by simultaneously touching 10mm snap contact
• Low battery indicator built into liquid crystal display(LCD)
• Micro-power circuit allows 9-volt alkaline battery to continuously display for approximately six months
• Conductive static-safe carrying case with protective anti-static foam included
• Detects how much static a person is carrying
• Audits any potential static generator or dissipater including the following:

Wrist straps, heel grounders, toe straps, static-safe shoes, chairs, table mats, floor mats, ground leads, purpose-built floors, garments, static  sprays, floor finishes, the difference in potential between two people or materials, etc.

 SPECIFICATIONS:

• The product have low battery reminding function
• The product can use two type of power,battery electrical source
• Working condition: Temperature 0～50℃, RH20%~85%, in-house.
• Power alarm: LCD will show"LOBAT"  when battery voltage <6.5V
• Test  range:+/-1~19990V
• Test accumulate: ±5%
• Material: ABS plastic
• Power: DC9V
• Dimension: W90mm×H34mm×150mm
• Weight: 210g (checker, not include battery)

 OPERATION:

• Before using the TE1018 Static-Check Meter for any of the below tests, ground the meter using the provided six-foot cord.  The cord has a 10mm snap at one end and a 4mm banana plug at the other end.
• The 10mm snap and the 4mm banana plug are a common ground on the TE1018 Static-Check Meter.