รายละเอียด
รายละเอียด
INTRODUCTION
The TE1018 Static-Check Meter is a simple, easy-to-use and inexpensive unit indicates how much static is present on a person and that drains the charge to the connected ground. This unit can be held in the held or mounted to a wall. The TE1018 Static-Check Meter is the all-around audit tool for your protection against static.
FEATURES:
- Quick visual display of static 0-19,990 volts
- Touch to test static in both positive and negative polarity
- Easy to ground by simultaneously touching 10mm snap contact
- Low battery indicator built into liquid crystal display(LCD)
- Micro-power circuit allows 9-volt alkaline battery to continuously display for approximately six months
- Conductive static-safe carrying case with protective anti-static foam included
- Detects how much static a person is carrying
- Audits any potential static generator or dissipater including the following:
Wrist straps, heel grounders, toe straps, static-safe shoes, chairs, table mats, floor mats, ground leads, purpose-built floors, garments, static sprays, floor finishes, the difference in potential between two people or materials, etc.
SPECIFICATIONS:
- The product have low battery reminding function
- The product can use two type of power,battery electrical source
- Working condition: Temperature 0~50℃, RH20%~85%, in-house.
- Power alarm: LCD will show"LOBAT" when battery voltage <6.5V
- Test range:+/-1~19990V
- Test accumulate: ±5%
- Material: ABS plastic
- Power: DC9V
- Dimension: W90mm×H34mm×150mm
- Weight: 210g (checker, not include battery)
OPERATION:
- Before using the TE1018 Static-Check Meter for any of the below tests, ground the meter using the provided six-foot cord. The cord has a 10mm snap at one end and a 4mm banana plug at the other end.
- The 10mm snap and the 4mm banana plug are a common ground on the TE1018 Static-Check Meter.