รายละเอียด
รายละเอียด
CHARACTERISTICS:
- High efficiency over 90%
- 12V/24V/48V
- Max.charge current 70A
- Inbuilt pure copper transformer
- Automatic three-stage battery Charger
- RS232 with free CD (option)
- Solar first function (option)
- Charge current adjustable (option)
- Remote control (option)
- CE certificate, Soncap certificate.
SPECIFICATIONS:
Model | 1012 |
---|---|
Line Mode Specifications: | |
Input Voltage Waveform | Sinusoidal (utility or generator) |
Nominal Input Voltage | 110Vac/ 120Vac/ 220Vac/ 230Vac/ 240Vac |
Low Line Disconnect | 96Vac±4%/155Vac±2% |
Low Line Re-connect | 100Vac±8%/164Vac ±2% |
High Line Disconnect | 132Vac±4%/272Vac±2% |
High Line Re-connect | 127Vac±4%/265Vac±2% |
Max AC Input Voltage | 140Vrms/270Vrms |
Nominal Input Frequency | 50Hz/ 60Hz (Auto detection) |
Low Line Frequency Re-connect | 58+0.3Hz for 60Hz; 44+0.3Hz for 50Hz; |
Low Line Frequency Disconnect | 57+0.3Hz for 60Hz; 40+0.3Hz for 50Hz; |
High Line Frequency Re-connect | 64+0.3Hz for 60Hz; 54+0.3Hz for 50Hz; |
High Line Frequency Disconnect | 80+0.3Hz for 50Hz; |
Output Voltage Waveform | As same as Input Waveform |
Over-Load Protection(SMPSload) | Circuit breaker |
Output Short Circuit Protection | Circuit breaker |
Efficiency (Line Mode) | >95% |
Transfer Switch Rating | 30A |
Transfer Time (Ac to Dc) | 10ms (typical) |
Transfer Time (Dc to Ac) | 10ms (typical) |
Pass through without Battery | Yes |
Max Bypass Overload Current | 30A |
Invert Mode Specifications: | |
Output Voltage Waveform | Sine wave |
Rated Output Power (VA) | 1000 |
Rated Output Power (W) | 1000 |
Power Factor | 1.0 |
Nominal Output Voltage (V) | 110Vac/ 120Vac/ 220Vac/ 230Vac/ 240Vac ± 10% |
Nominal Output Frequency (Hz) | 60Hz ± 0.3Hz/50Hz ± 0.3Hz |
Auto tracking Main Frequency(Hz) | Yes (Following Main first connection) 50Hz @48-54Hz ;60Hz @58-64Hz |
Output Voltage Regulation | ±10% rms |
Nominal Efficiency | >88% |
Over-Load Protection (SMPS load) | (110%150% ±10%: Fault (shutdown output) after 20s; |
Surge rating (10s) | 3000VA |
Capable of starting electric motor | 1 HP |
Output Short Circuit Protection | Current limit (Fault after 10s) |
Bypass Breaker Size | 10A |
Nominal DC Input Voltage | 12V |
Min DC start voltage | 11V/22V/43V |
Low Battery Alarm | 10.5Vdc ± 0.3Vdc for 12V battery; 21.0Vdc ± 0.6Vdc for 24V battery; 42.0Vdc ± 0.6Vdc for 48V battery |
Low DC input Shut-down | 10.0Vdc ± 0.3Vdc for 12V battery; 20.0vdc± 0.6Vdc for 24V battery; 40.0Vdc± 0.6Vdc for 48V battery |
High DC input Alarm & Fault | 16Vdc ± 0.3Vdc for 12V battery; 32Vdc ± 0.6Vdc for 24V battery; 64Vdc ± 0.6Vdc for 48V battery |
High DC input Recovery | 15.5Vdc ± 0.3Vdc for 12V battery; 31.0Vdc ± 0.6Vdc for 24V battery; 62.0Vdc ± 0.6Vdc for 48V battery |
Power saver | Load ≤25W (Enabled on “P/S auto” setting of Remote control) |
Charge Mode Specifications: | |
Nominal Input Voltage | 110Vac/ 230Vac/ 220Vac/ 230Vac/ 240Vac |
Input Voltage Range | 96~132Vac/ 155~272Vac |
Nominal Output Voltage | According to the battery type |
Nominal Charge Current | 35A |
Charge Current Regulation | 25%, 50%, 75%, 100% charge current adjustable |
Battery initial voltage | 0 –15.7 Vdc/ 31.4Vdc/ 62.8Vdc (can operate with 0V battery) |
Charger Short Circuit Protection | Circuit breaker |
Over Charge Protection | Bat. V ≥ 15.7Vdc/ 31.4Vdc/ 62.8Vdc, beeps 0.5s every 1s & fault after 60s |
General Specifications | |
Safety Certification | CE(EN62040-1) |
EMC Classification | EN62040-2,C2 |
Operating Temperature Range | 0°C to 40°C |
Storage temperature | 15°C below zero to 60°C |
Operation humidity | 5% to 95% |
Audible Noise | 60dB max |
Cooling | Forced air, variable speed fan |
Carton Size | 570X315X300MM |